Yvf2 Series Variable Frequency Adjustable Speed Three Phase Asynchronous Motor

Yvf2  Series Variable Frequency Adjustable Speed Three Phase Asynchronous Motor

Product Description:

      YVF2 series variable frequency velocity 3-phase asynchronous motor is a variable frequency pace a few-stage asynchronous motor with frequency converter as power offer. By shifting the frequency of energy offer, the speed of motor can be adjusted smoothly to save strength and management automation.
       
      YVF2 series motors have greater performance, vast speed assortment, large accuracy, secure operation and convenient maintenance. Its set up dimension fulfills the IEC common, and its shell defense stage is IP54. The motor has an external fan cooler. The motor quota is a ongoing quota based mostly on the continuous functioning program S1. The rated voltage is 380V F-class insulation, rated frequency is 50HZ motor can continuously adjust speed in the range of 3-100HZ, three-50HZ is consistent torque operation, 50-100HZ is continual electricity operation. If the greatest torque is better than the value in the table or the seat variety of YVF2-160M or below does not require an exterior admirer cooler (lower electrical power use), it need to be noted in the order.
 

Item Title YVF2 (eighty–225) series variable frequency adjustable speed a few section asynchronous motor
Motor Kind DC Motor,ACMotor,Stepper Motor,Asynchronous Motor ,Synchronous Motor
(CZPT equipment)
sequence TPYM series
Working pace  Constant Speed /Reduced Velocity /Alter Speed /Large Speed Other 
Rated voltage: 380V
Rated electrical power .75 ~ 315KW
Reference frequency 50Hz
Cooling mode IC411
Insulation course F
Safety stage IP54 or IP55
Altitude no more than a thousand meters
Link 3kW and beneath for Y relationship, 4kW and earlier mentioned for delta connection.
Simple framework forms B3, B5, B35, B14, B34
Software YVF2 collection motors are appropriate for driving rolling, lifting, transportation, machine equipment, printing and dyeing, papermaking, chemical market, textile, pharmaceutical and other mechanical products necessitating ongoing and repeated positive and damaging inversion, and can be utilized in conjunction with different frequency conversion electrical power offer at property and abroad.
Servicing approach Specialist motor maintenance heart motor maintenance procedure: cleaning stator and rotor – changing carbon brush or other areas – vacuum F pressure dipping paint – drying – Calibration stability.
one. Use surroundings must be often dry, motor floor should be stored thoroughly clean, air consumption should not be hindered by dust, fibers and other obstacles.
2. When the thermal protection of the motor continues to operate, it ought to be ascertained regardless of whether the fault will come from the motor or the overload or the setting value of the protective device is too lower. Soon after removing the fault, it can be place into procedure.
3, make certain that the motor is well lubricated for the duration of operation. The standard motor runs for about 5000 hrs, that is to say, lubricating grease need to be added or replaced. When bearing overheating or lubricating deterioration is located in operation, the hydraulic force should modify lubricating grease in time. When replacing grease, the previous grease must be eliminated, and the oil groove of bearing and bearing go over must be washed with gasoline. Then ZL-3 lithium grease need to be filled with 1/two (2 poles) and two/three (4 poles, six poles and 8 poles) of the cavity between the inner and outer rings of the bearing.
4. When the existence of the bearing is in excess of, the vibration and sound of the motor will improve naturally. When the radial clearance of the bearing reaches the following value, the bearing must be replaced.
5, when getting rid of the motor, it is Okay to take away the rotor from the shaft extension or the non extension stop. If it is not needed to unload the admirer, it is much more convenient to consider out the rotor from the non-axle extension stop. When pulling out the rotor from the stator, the stator winding or insulation ought to be prevented from getting destroyed.
six. When changing the windings, the type, dimension, turns and gauges of the authentic windings must be recorded. When these info are misplaced, they ought to be obtained from the producer and the original developed windings must be modified at will, which typically deteriorates one particular or many performance of the motor or even can make it not possible to use them.

 

 

Yvf2  Series Variable Frequency Adjustable Speed Three Phase Asynchronous Motor

Tags