Synchronous Motor-for Sintering Fan\ Blast Furnace Fan, Water Pump T5600-4 1650 5600kw 10kv

Synchronous Motor-for Sintering Fan Blast Furnace Fan, Water Pump T5600-4 1650 5600kw 10kv

Motors are  usually employed to push products this kind of as blast furnace followers and sintering enthusiasts in the metallurgical business
I. Overview
T sequence huge-scale three-section 4-pole, six-pole synchronous motor and many others are sequence of products developed by our business on the foundation of introducing and absorbing sophisticated technologies at residence and abroad. It is widely utilized in petroleum, chemical, electric powered electrical power and other industries, and is employed to travel high-inertia mechanical hundreds this sort of as enthusiasts, pumps, and compressors.
This collection of motors adopts new technologies, new components, new procedures, exquisite content variety, refined producing, little size, light-weight fat, substantial efficiency, reduced sound, low vibration, protected and dependable procedure, and practical use and maintenance.
Two implementation expectations
GB755 Rotating Motor Score and Overall performance
CZPT problems of JB/T2224 large AC a few-stage 4-pole synchronous motor
GB/T1571 A few-stage synchronous motor examination technique
GB/T997 motor structure and set up sort code
GB/T1993 Rotating Machine Cooling Technique
GB/T4942.1 Motor shell security quality
GB/T10068 Rotating motor vibration measurement method and restrict
GB/T10069 Rotating Device Sounds Measurement Method and Restrict
three. Fundamental specialized parameters
Energy assortment: four hundred~40000KW
Voltage: 6000, 10000V
Velocity: 1000, 1500r/min
Rated frequency: 50HZ
Safety level: IP44, IP54
Insulation course: F
Quota: S1
Cooling technique: IC81W, IC91W
Installation method, IM1001
*Can be produced in accordance to other parameters according to user wants
4, technical characteristics
4.1 By adding a “Γ”-shaped damping ring to the solid magnetic poles, the motor can give a massive adequate starting torque, a pulling torque and a decrease starting up recent, which can ensure the easy commencing and acceleration of the motor, and have a modest impact on the power grid, and meet the user load specifications .
four.two The use of new insulating resources and insulation technologies, with tremendous powerful insulation and voltage resistance.
four.3 The motor adopts course F insulation, and the temperature increase is assessed in accordance to the temperature rise limit worth of course B insulation. It has a long support existence and a great ventilation system, which makes the unit under a variety of doing work situations this kind of as startup, overload, overexcitation, underexcitation, and shutdown. Ensure that the temperature increase of every single component does not exceed the allowable restrict.
four.four Through correct calculation and investigation, the construction of the rotor is decided. The high-electrical power motor adopts the integrated framework technologies of shaft and choke to make the motor safe and reliable.
4.5 The security gadget is sophisticated and comprehensive.
4.five.1 The stator windings and bearings are equipped with temperature detection products, which can detect, alarm and trip.
4.five.two Shutdown area heater with anti-condensation effect.
5, framework sort
five.1 The framework of this series of motors is typically horizontal, and the cooling method is a shut circulating air cooling method, which is located at the base of the motor. For extra-high-electricity motors, it is of box-type structure and water-cooled.
five.2 The motor magnetic material adopts substantial-quality chilly-rolled silicon steel sheet with high magnetic permeability and lower decline, which increases the working effectiveness of the motor and minimizes the running expense of the motor. Rigid stator structure, the iron core is set on the supporting ribs of the body in the circumferential route by way of the dovetail groove and compressed in sections with substantial force, and all the forces are transmitted to the foundation by means of the body, reducing vibration. The damping ring and the magnetic pole undertake a special repairing technique to avoid malfunctions induced by very poor contact all internal conductive body connectors, fasteners, supports and screws on the rotating entire body have anti-loosening actions to ensure firmness and reliability.
5.three The stator winding is handled with VPI as a whole dipping paint, which has high electrical overall performance, mechanical power, insulation overall performance, humidity resistance and thermal security.
5.4 The bearing is a sliding bearing with strain oil circulation, which is put in in a bearing seat manufactured of forged steel. The sliding bearing has a spherical bearing that can instantly alter the middle. The interior surface of the bearing is coated with a layer of Babbitt alloy to stop power technology Direct-tin eutectic takes place when the equipment is operating at substantial temperature. The bearings are insulated to avoid shaft currents.
six. Problems of Use
6.1 Voltage fluctuation: ±5% (It can operate at ±10% underneath the issue of 7.three in GB755).
six.2 Frequency fluctuation: ±2%.
6.3 The altitude does not exceed 5000m
6.4 The maximum ambient air temperature does not exceed +50ºC,
6.5 The inlet temperature of the cooling drinking water of the air cooler should be stored within the assortment of 6~33ºC, the stress of the cooling drinking water is .3Mpa, and the cooling drinking water should have no corrosion influence on copper and iron.
six.six If the over simple conditions of use are exceeded, corresponding steps or unique orders should be taken.
Seven, product description
Motor with construction sort IM7311: Motor with composition sort IM1001
T7000-4/1730T1120-415000KW

Outer diameter of stator core (Φ1730mm) Rated energy (15000KW)

Number of poles (4 poles) Amount of poles (four poles)

Rated electrical power (7000KW) Centre top (1120mm)

T series synchronous motor T series synchronous motor
eight. Ordering guidelines
eight.one Ahead of placing an order, make sure you refer to the item catalog of this sequence to make clear the necessary merchandise model, specifications and other information. If there is any discrepancy among the necessary kinds and requirements, remember to speak to our firm.
8.2 When ordering, the motor design, rated energy, velocity, rated voltage, rated frequency, defense stage, load minute of inertia, rotation course, installation kind, and so forth. should be indicated.
8.three The technological information sheet in the catalog only lists the pertinent knowledge of motors with rated voltages of 6KV and 10KV. If users demand other voltage stages, our firm can also give complex info when purchasing.
8.4 The technological knowledge and dimensions in the sample are only for reference when consumers select versions. The formal data will be provided by the organization right after the deal or complex settlement is signed.
eight.five If you have any other unique requirements, this sort of as brushless excitation, variable frequency begin, etc., remember to supply the specifications and indicator the appropriate complex arrangement when ordering.
 
 

Synchronous Motor-for Sintering Fan Blast Furnace Fan, Water Pump T5600-4 1650 5600kw 10kv

Tags